Etek Electric Outboard Motor Project
version 2.0
Making a Sneakeasy even Sneakier
I was going to work on prop efficiency but I had a SNEAKEASY laying around so I put the etek unit on it. The combo works well, smooth ride, low wake, and quiiiiiiiet. In the top photo, the boat trimmed out nicely with the batteries located just behind the front seat. In the second photo, the boat had just come out of a turn. The low wake is apparent and there was very little turbulence from the prop.
The Test Data from this trial
Weight as tested approximately 1450 lbs.
Full power- 80 amps, 36v, 6.7 mph- 3.86 hp input
Half power- 40 amps, 36v, 5.6 mph-1.93 hp
Slow- 20 amps, 36v, 4.0 mph.-0.96 hp
Battery rating- 75 amps for 108 min.
I took out the smelly gas tanks which are mounted just behind the rear seat. A simple remote steering adapter was built for the Etek to fit the existing cable controls. In the second photo you can see where the batteries are placed. The six batteries weigh a combined weight of 378 pounds
I've still got to work on prop efficiency. Stop back by sometime and see how the experiments go

Go to update page click here

email: jmrudholm@psnw.com
Click here to return to home page
You are visitor number24929